 |
Programmator FAQ:
NEC NEAX 2400/7400 M100/80 PBX
|
Connection problems
After failure to establish the
communication with the PBX the program will display the
message about the error, containing the supposed reasons - try
to eliminate them.
If the reason is not clear, check the
following aspects:
-
accuracy of scheme of the connecting
cable
-
whether settings of the communication
parameters for the PBX and for the program coincide with
each other (see 'Settings->Profiles')
-
whether the computer COM-port to which
you hook-up the cable is operable (for example, you can
hook-up the external modem or the mouse to this port for
such inspection)
-
whether the right password for the access
to the PBX programming is specified in the settings of the
program (if there is a password; it could be changed in
'Settings->Profiles' menu item)
You could try manual connect to the PBX
with the aid of the terminal built-in into the program (it is
called from 'Windows->Terminal' menu item).
Forced data reading
In case when
-
either was read data file saved before,
or if the data were earlier downloaded from the PBX
-
the program is in On Line mode
the program will not repeatedly re-read
already available data, when accessing the edit window (for
example, Numbering Plan of the 'Parameters' window). However,
it is possible to force reading of the required data, if you
will click with a mouse at the required line, and will keep
pressed the Ctrl key button of the computer keyboard
simultaneously.
Moving stations from one group to
another
It is possible to move the required stations from one group
to the other at the pages Pick Groups, UCD groups and Call
Hunting of the 'Stations' window, just by pulling them with a
mouse. However, there is another method - first click with a
mouse at the final group (to which you need to move the
stations), then click with the right button of the mouse and
select 'Enter & Move'. You can enter list of the stations,
which you need to move to the selected group, in the dialogue
window which will appear. (It is not necessary for the
stations belong to one group). |
